• <td id="182ma"><option id="182ma"></option></td>
  • <td id="182ma"></td>

  • <track id="182ma"></track>
    <table id="182ma"><option id="182ma"></option></table>
    Hello! Welcome to Ningguo Zhicheng Machine Manufacturing Co.,Ltd official website!
    Originality Foundry machinery automation equipment

    Aim to be realistic and innovative, honest and efficient service

    13805634258
    Where are you now:????Home > Products>Intellectualization of casting
    Contact us

    Address:Changye Road,Ningguo City Economic and technological development,Anhui Province

    Mobile:+86-13865330979

    Tel: +86-563-4187908

    Fax: +86-563-4172769

    E-mail: Web@ngzc.com

    R91 series tilting casting machine

      I. Overview:

      R91 series pouring machine is driven by hydraulic pressure, which is mainly composed of ladle tilting mechanism, ladle cap rotating mechanism, ladle trolley, longitudinal cart, etc. Casting machine is optional with flow inoculation device. The casting machine has the characteristics of simple operation, stable operation, safety and reliability. Suitable for various types of mechanical casting production lines used.

      Ii. Main Technical parameters:

      1. Total power of equipment: 5.5kW

      2. Total weight of equipment: about 4t

      3. Casting capacity: optional: 1200kg, 1500kg, 2000kg, 2500kg

      4. Maximum tilt Angle: 90°

      5. Tilting speed: stepless and adjustable

      6. Working pressure: 6Mpa

      7. Heat preservation method: Cover seal and heat preservation

      8. Longitudinal stroke: 0~8000mm

      9. Driving mode: hydraulic pressure

      10. Scope of application: various mechanized production lines

      11. Overall dimension: 6.5m long * 1.7m wide * 1.6m high

      The composition and working principle of the equipment

      The whole equipment is composed of a frame, special ladle, ladle tilting mechanism, ladle cap rotating mechanism, ladle trolley, longitudinal shift cart, hydraulic station, electric control system, operation room and so on.

      The tilting mechanism of the ladle takes the nozzle as the rotation center, so that the iron flow is always aligned with the pouring mouth of the sand box, and there is no need to adjust the position and height of the ladle laterally.

      The cap-rotating mechanism and the ladle tilting mechanism follow up, which simplifies the control mechanism and ensures the ladle is always sealed, minimizing the heat dissipation of molten iron.

      After the molten iron is poured, the cover can be opened by the cover rotating mechanism, and then the empty ladle can be lifted out of the pouring machine by the ladle cart, or the molten iron can be directly added into the ladle. The limited position device on the base of the trolley ensures that the ladle can be placed accurately on the base of the trolley during hoisting.

      The pouring ladle itself also has a tilting mechanism, in the pouring machine fault or need to return to the furnace, the pouring ladle can be out of the pouring machine through its own tilting mechanism for pouring molten iron.

      The operation room of pouring machine is inside the pouring machine, the operation room is equipped with air conditioning, the operator's line of sight is very good, the operation difficulty is low, can observe the pouring situation very well, and greatly improved the working environment of pouring man, reduced the skill requirement of pouring man.

      Iv. Operation instructions

      Operators should be trained and read the instructions carefully before operating the machine, and be familiar with the control panel.

      Before pouring, the operator should first check whether there is enough hydraulic oil in the hydraulic oil tank, then enter the operation room to turn on the power, press the start button of the oil pump, and manually operate each action of the pouring machine. The casting can be prepared after the commissioning is completed.

      The cover is lifted up by the rocker switch, the ladle is placed on the base by the ladle cart to exit the pouring machine, the ladle filled with molten iron is placed on the base smoothly, the ladle is stable and its position is not shifted, and then the rocker switch of the ladle cart is pulled to feed the ladle into the pouring machine. When the ladle is in place, cover the ladle and align the pouring buffer nozzle with the pouring mouth of the sand box.

      The tilting of the ladle is controlled by the hydraulic steering machine. The operator can control the tilting speed and the tilting Angle of the ladle according to the needs. When it is necessary to move the pouring, the rocker switch pouring machine can move along the pouring line to the next box to be poured sand box.

      After the first package of molten iron is poured, pull the rocker switch to open the cover, and then send the cart to withdraw. At this time, you can directly add molten iron to the ladle or fill the ladle with molten iron after the ladle has gone and then lift it back to the ladle.


      


      

    ON:Constant temperature pouring machineNEXT:Fully automatic horizontal parting line

      Address:Changye Road,Ningguo City Economic and technological development,Anhui Province

      Mobile:+86-13865330979

      Tel: +86-563-4187908

      Fax: +86-563-4172769

      E-mail: Web@ngzc.com

    Online consultation

    Tel:

    13805634258

    • Mobile terminal

    • WeChat official account

    Ningguo Zhicheng Machinery Manufacturing Co., LTD. All rights Reserved  皖公網安備 34188102000128號 皖ICP備13012249號-1

    思思热在线视频精品_久久99国产精品久久99软件_欧美一级做a爰片久久高潮_国产精品日产三级在线观看

  • <td id="182ma"><option id="182ma"></option></td>
  • <td id="182ma"></td>

  • <track id="182ma"></track>
    <table id="182ma"><option id="182ma"></option></table>